Sparex

Hammer Flail, Top width: 89mm, Bottom width: 155mm, Hole Ø: 20.5mm, Radius 110mm - Replacement for Kuhn To fit as: 6060007 - S.79734

Kuhn Hammer Flail Replacement - 6060007, S.79734

1.66 kg

Sparex

Loader Tine - Straight 810mm, Thread size: M24 x 1.50 (Square) To fit as: KK221189 - S.79444

Loader Tine - 810mm, M24 x 1.50, KK221189

4.3 kg

Sparex

Mower Blade - Twisted blade, top edge sharp - 105 x 47x4mm - Hole Ø20.5mm - LH - Replacement for Kuhn, John Deere To fit as: K6801410 | Sparex Part No.S.79520

Kuhn & John Deere Mower Blade - LH - 105x47x4mm

0.16 kg

Sparex

S Tine Clamp with helper 32x10mm Suitable for 50x12mm | Sparex Part No.S.79397

S Tine Clamp 32x10mm, Fits 50x12mm - Sparex S.79397

0.32 kg

Sparex

Grass & Weeder Tine Length:607mm, Width:104mm, Ø7mm - Replacement for Doublet Record To fit as: 50400307 | Sparex Part No.S.79442

Replacement Tine for Doublet Record - 607mm x 104mm

0.6 kg

Sparex

Hammer Flail, Top width: 13mm, Bottom width: 55mm, Hole Ø: 42 x 15.5mm, Radius 76mm - Replacement for Bomford, McConnel To fit as: 7190462 | Sparex Part No.S.78998

Hammer Flail Replacement - Bomford, McConnel - 7190462

0.5 kg

Sparex

Inner Tube, 3.50/4.00 - 8, TR87 Angled Valve, Suitable for Air | Sparex Part No.S.78913

Inner Tube 3.50/4.00 - 8, TR87 Valve, Sparex S.78913

0.42 kg

Sparex

Inner Tube, 3.50/4.00 - 4, TR87 Angled Valve, Suitable for Air | Sparex Part No.S.78910

Inner Tube 3.50/4.00 - 4, TR87 Valve, Sparex S.78910

0.3 kg

Sparex

Round Countersunk Square Hex Bolt & Nut (TFCC) - M11 x 45mm, Tensile strength 8.8 (25 pcs. Box) | Sparex Part No.S.78817

M11 x 45mm Round Countersunk Square Hex Bolt & Nut (25 pcs)

0.05 kg

Sparex

Slurry Plate 4'' x 4'' Replacement for Howard To fit as: 68625 | Sparex Part No.S.78867

Howard Slurry Plate Replacement - 4" x 4" (68625)

0.52 kg

Sparex

Fuel Filter Screw Kit | Sparex Part No.S.75582

Sparex Fuel Filter Screw Kit S.75582

0.33 kg

Sparex

Round Countersunk Square Hex Bolt & Nut (TFCC) - 7/16'' x 32mm, Tensile strength 8.8 (25 pcs. Box) To fit as: 375643X1 | Sparex Part No.S.78713

7/16" x 32mm Round Countersunk Square Hex Bolt & Nut (25 pc)

0.04 kg

Sparex

Pick-Up Tine - - - Length:190mm, Width:75mm, Ø5mm - Replacement for Claas, Bautz To fit as: 8214211 | Sparex Part No.S.78299

0.2 kg

Sparex

Mower blade holder - Length :210mm, Width: 126mm, Hole centres: 75mm - Replacement for PZ To fit as: PZ0243 | Sparex Part No.S.78387

Mower Blade Holder - PZ0243, S.78387, 210mm x 126mm

0.68 kg

Sparex

Roundhead Rivet M6.0 x 30mm (1/2 kg) | Sparex Part No.S.78515

Roundhead Rivets M6.0 x 30mm - Sparex S.78515 (1/2 kg)

0.54 kg

Sparex

Tedder haytine - RH - Length: 460mm, Width: 137mm, Ø11mm - Replacement for Vicon To fit as: 99136241 | Sparex Part No.S.77909

Tedder Haytine Replacement - Vicon 99136241, Sparex S.77909

0.67 kg

Sparex

Tedder haytine - LH - Length: 460mm, Width: 137mm, Ø11mm - Replacement for Vicon To fit as: 99136240 | Sparex Part No.S.77908

Tedder Haytine LH - 460mm x 137mm, Ø11mm - Vicon Replacement

0.67 kg

Sparex

Rotavator Blade Square LH 80x7mm Height: 190mm. Hole centres: 57mm. Hole Ø: 14.5mm. Replacement for Krone To fit as: 036395 | Sparex Part No.S.77251

Krone Rotavator Blade LH 80x7mm - 036395 Replacement

1.03 kg

Sparex

Rotavator Blade Square RH 80x7mm Height: 190mm. Hole centres: 57mm. Hole Ø: 14.5mm. Replacement for Krone To fit as: 036273 | Sparex Part No.S.77250

Krone Rotavator Blade Replacement - 80x7mm, 190mm

1.0 kg

Sparex

S Tine 32x10x550mm To fit as: 01000636 - S.77126

S Tine 32x10x550mm - 01000636 - S.77126

2.92 kg

Sparex

Loader Tine Nut M28 To fit as: 201200 | Sparex Part No.S.77030

Loader Tine Nut M28 - Sparex S.77030 (Fits 201200)

0.13 kg

Sparex

Rubber Boot - Levelling Box | Sparex Part No.S.74455

Rubber Boot - Levelling Box | Sparex S.74455

0.02 kg

Sparex

Hydraulic Filter - Element | Sparex Part No.S.76640

Hydraulic Filter Element | Sparex S.76640

0.29 kg

Sparex

S Tine Clamp without helper 32x12mm Suitable for 50x15mm | Sparex Part No.S.74822

S Tine Clamp 32x12mm - Sparex S.74822

0.25 kg

Sparex

Hydraulic Top Cover Gasket | Sparex Part No.S.66301

Hydraulic Top Cover Gasket - Sparex S.66301

0.04 kg

Sparex

Fuel Storage Tank Filter Element - 10 Microns - S.73154

Fuel Tank Filter Element (10 Micron) - S.73154

0.2 kg

Sparex

Starter Motor - 12V, 2.7Kw (Lucas TVS) | Sparex Part No.S.68279

Lucas TVS Starter Motor - 12V, 2.7Kw - Sparex S.68279

11.56 kg

Sparex

Ignition Switch | Sparex Part No.S.62278

Ignition Switch | Sparex S.62278 - Replace & Repair

0.46 kg

Sparex

Oil Seal, 50 x 82 x 10mm | Sparex Part No.S.62301

Oil Seal 50x82x10mm, Sparex S.62301 - Engine & Transmission

0.06 kg

Sparex

Main Bearing +0.020'' (0.50mm) (Set) | Sparex Part No.S.60337

Main Bearings +0.020" (0.50mm) Set - Sparex S.60337

0.9 kg

Sparex

PTO CLUTCH INNER SPRING | Sparex Part No.S.6189

Sparex PTO Clutch Inner Spring S.6189

0.01 kg

Sparex

PTO Yoke - Interfering Clamp Bolt (U/J Size: 30.2 x 92mm) Bore Ø35mm, Key Size: 10mm. | Sparex Part No.S.6114

PTO Yoke Clamp Bolt - 30.2 x 92mm, Bore Ø35mm, Key 10mm - S.6114

1.91 kg

Sparex

PTO Yoke - Quick Release (U/J Size: 23.8 x 61.2mm) Size: 1 3/8''-6 Spline | Sparex Part No.S.6038

PTO Yoke Quick Release (U/J) - 1 3/8''-6 Spline

0.87 kg

Sparex

Imperial Rotary Shaft Seal, 2 1/8'' x 2 7/8'' x 1/2'' | Sparex Part No.S.5947

Imperial Rotary Shaft Seal - S.5947 | 2 1/8" x 2 7/8" x 1/2"

0.04 kg

Sparex

Imperial Castle Nut, Size: 3/4'' UNF (DIN | Standard No. DIN 935) Tensile strength: 8.8 | Sparex Part No.S.5694

Imperial Castle Nut 3/4" UNF (DIN 935) 8.8 Tensile Strength

0.06 kg

Sparex

Top Cap To fit as: 90070589 | Sparex Part No.S.59706

Top Cap for 90070589 | Sparex S.59706

0.3 kg

Sparex

Mirror Head - Rectangular, Convex, 314 x 225mm, RH & LH - S.56846

Convex Mirror Head - Rectangular, 314 x 225mm, RH & LH

1.38 kg

Sparex

Flexible Spout | Sparex Part No.S.5900

Flexible Spout - Sparex S.5900

0.03 kg

Sparex

Main Bearing +0.020'' (0.50mm) (Set) | Sparex Part No.S.57532

Main Bearings +0.020" (0.50mm) Set - Sparex S.57532

0.45 kg

Sparex

Sparex Quick Release Hydraulic Coupling Female 1/2'' Body x 1/2'' BSP Female Thread (Agripak 1 pc.) | Sparex Part No.S.5643

Sparex Quick Release Coupling - 1/2" BSP Female (Agripak)

0.29 kg

Sparex

Stop Switch | Sparex Part No.S.52826

Stop Switch | Sparex S.52826 - Replacement Part

0.04 kg

Sparex

Inspection Plug | Sparex Part No.S.43951

Inspection Plug | Sparex S.43951 - Fits Most Models

0.01 kg

Sparex

Weasler Universal Joint - 27 x 75 & 24 x 91mm (Standard Duty) | Sparex Part No.S.51152

Weasler Universal Joint - 27x75 & 24x91mm (Standard Duty)

0.45 kg

Sparex

Lower Link Weld On Ball End (Cat. 1) | Sparex Part No.S.491338

Lower Link Weld On Ball End (Cat. 1) - Sparex S.491338

0.84 kg

Sparex

Top Link Ball End - 3/4 UNC - Cat.0 | Sparex Part No.S.4423

Top Link Ball End - 3/4 UNC - Sparex S.4423

0.35 kg

Sparex

Head Light, (Halogen), RH & LH, Straight, 12V - S.43796

Halogen Headlights - Right & Left, 12V - S.43796

0.88 kg

Sparex

Seal Repair Kits for Quick Release Couplings 1/2'' (Fits: S.4349) - S.4301

Seal Repair Kit for Quick Release Couplings 1/2" (S.4349)

0.01 kg

Sparex

Foot Throttle Kit | Sparex Part No.S.42691

Foot Throttle Kit | Sparex S.42691 | Motorcycle Replacement

3.88 kg

Sparex

Ignition Coil 12V | Sparex Part No.S.42377

12V Ignition Coil - Sparex S.42377

0.72 kg

Sparex

Stop Control Knob | Sparex Part No.S.41558

Stop Control Knob - Sparex Part S.41558

0.01 kg