New Arrivals

New arrival

JMCE

*SPECIAL PRICE* - Lower Link Weld On Ball End (Cat. 2) RH | Sparex Part No.S.60025

1.77 kg

(1)

Very low stock (1 unit)

323 SEK

A set of metal engine bearings, the Main Bearing Std. (Set) by Sparex (Part No.S.57656), compatible with International Harvester models, arranged in a curved pattern on a white background.

New arrival

JMCE

*SPECIAL PRICE* - Main Bearing Std. (Set) | Sparex Part No.S.57656

1.11 kg

(1)

Very low stock (1 unit)

1 156 SEK

A black rubber Bypass Hose with a slightly textured, cylindrical design, displayed against a white background, and secured with a hose clip marked S.40082 from Sparex.

New arrival

JMCE

*SPECIAL PRICE* - Bypass Hose, Inner Ø of Hose Smaller End: 28mm, Inner Ø of Hose Bigger End: 28mm | Sparex Part No.S.40082

0.07 kg

(1)

Low stock (10 units)

10 SEK

Pre Insulated Bullet Terminal, Standard Grip - Male, 5.0mm, Blue (1.5 - 2.5mm)
- S.8549 - Massey Tractor Parts

New arrival

JMCE

*SPECIAL PRICE* - Pre Insulated Bullet Terminal - S.8549

0.01 kg

(1)

In stock (59 units)

1 SEK

A Bush 1661237M1, also known as Sparex Part No. S.61031, designed to prevent loosening due to vibrations, is displayed on a white background. This essential component is compatible with Massey Ferguson equipment and can be found in the Sparex catalog.

New arrival

JMCE

*SPECIAL PRICE* - Bush 1661237M1 | Sparex Part No.S.61031

0.04 kg

(1)

Very low stock (2 units)

120 SEK

A flat, rectangular metal sheet with a single round hole near the top right corner and tapered bottom edges, ideal for a Rasspe Fitting, described as the Mower Blade - Twisted blade, bottom edge sharp & parallel - 94 x 48x3mm - Hole Ø19mm - LH by Sparex (Sparex Part No. S.77114), is perfect for replacing parts in PZ, Krone, Vicon, Kuhn machinery and to fit as TF71.

New arrival

JMCE

*SPECIAL PRICE* - Mower Blade - Twisted blade, bottom edge sharp & parallel - 94 x 48x3mm - Hole Ø19mm - LH - Replacement for PZ, Krone, Vicon, Kuhn To fit as: TF71 | Sparex Part No.S.77114

0.09 kg

(1)

In stock (25 units)

12 SEK

A smooth triangular metal piece with three sides of differing lengths, featuring two 5.5mm holes spaced 51mm apart, compatible as a replacement for Massey Ferguson models. Product: Knife section 80x76x2mm (Sparex S.78330) to fit as: 817020M1.

New arrival

JMCE

*SPECIAL PRICE* - Knife section - Smooth - 80x76x2mm - Hole Ø5.5mm - Hole centres 51mm - Replacement forMassey Ferguson To fit as: 817020M1 - S.78330

0.06 kg

(1)

In stock (14 units)

12 SEK

A metallic grease nipple, branded Sparex and listed under Part No.S.859, features a hexagonal nut, M10 x 1.50 threading on both ends, and a 45° angled design.

New arrival

JMCE

*SPECIAL PRICE* - Grease Nipple | Sparex Part No.S.859

0.01 kg

(1)

Low stock (9 units)

11 SEK

Round Countersunk Square Hex Bolt & Nut (TFCC) - M11 x 45mm, Tensile strength 8.8 (25 pcs. Box)
- S.78817 - Massey Tractor Parts

New arrival

JMCE

*SPECIAL PRICE* - Round Countersunk Square Hex Bolt & Nut (TFCC) - M11 x 45mm, Tensile strength 8.8 (25 pcs. Box) | Sparex Part No.S.78817

0.05 kg

(1)

In stock (25 units)

6 SEK

A cylindrical metal spacer with an inner diameter of 16mm, outer diameter of 25.5mm, and length of 19mm, perfect for use with fasteners in machinery from brands like Sparex or Desvoys. This is a replacement part compatible with Desvoys, Falc (KRM), Quivogne, Votex, Ferri | Sparex Part No.S.78894.

New arrival

JMCE

*SPECIAL PRICE* - Bush ID: 16mm, OD: 25.5mm, Length: 19mm - Replacement for Desvoys, Falc (KRM), Quivogne, Votex, Ferri | Sparex Part No.S.78894

0.02 kg

(1)

Low stock (10 units)

17 SEK

Round Countersunk Square Hex Bolt & Nut (TFCC) - 7/16" x 64mm, Tensile strength 8.8 (25 pcs. Box) - S.78720 - Farming Parts

New arrival

JMCE

*SPECIAL PRICE* - Round Countersunk Square Hex Bolt & Nut (TFCC) - 7/16'' x 64mm, Tensile strength 8.8 (25 pcs. Box) | Sparex Part No.S.78720

0.06 kg

(1)

Low stock (7 units)

14 SEK

A Sparex Roundhead Rivet (M6.0 x 30mm) with a smooth surface and domed head, viewed from the side against a plain white background, adheres to DIN Standard.

New arrival

JMCE

*SPECIAL PRICE* - Roundhead Rivet M6.0 x 30mm (1/2 kg) | Sparex Part No.S.78515

0.54 kg

(1)

Very low stock (2 units)

108 SEK

New arrival

JMCE

*SPECIAL PRICE* - Mega Fuse - 225 Amps (Beige) | Sparex Part No.S.7911225

0.01 kg

(1)

Very low stock (1 unit)

66 SEK

The Fuel Injector Pipe (Sparex Part No. S.41439) from Sparex is a metal pipe with threaded fittings at each end and a zigzag bend in the middle, compatible with Sparex parts.

New arrival

JMCE

*SPECIAL PRICE* - Fuel Injector Pipe | Sparex Part No.S.41439

0.13 kg

(1)

Very low stock (1 unit)

114 SEK

Two metal wire tension springs, each featuring coiled and straight sections, from Sparex, measuring 607mm in length against a white background.

New arrival

JMCE

*SPECIAL PRICE* - Grass & Weeder Tine Length:607mm, Width:104mm, Ø7mm - Replacement for Doublet Record To fit as: 50400307 | Sparex Part No.S.79442

0.6 kg

(1)

Very low stock (1 unit)

89 SEK

Close-up of a Sparex Countersunk Head Bolt 2 Nibs With Nut (TF2E) - M12 x 40mm, featuring a hexagonal head and visible threading, with tensile strength 8.8.

New arrival

JMCE

*SPECIAL PRICE* - Countersunk Head Bolt 2 Nibs With Nut (TF2E) - M12 x 40mm, Tensile strength 8.8 (25 pcs. Box) | Sparex Part No.S.78766

0.05 kg

(1)

In stock (100 units)

7 SEK

Image of a Brake & Clutch Cylinder Repair Kit (Sparex Part No. S.57736) from Sparex, featuring a black accordion-style rubber bellows with a set of green and metal components including seals and a spring, typically used in automotive or mechanical applications as part of a master cylinder brake & clutch seal kit.

New arrival

JMCE

*SPECIAL PRICE* - Brake & Clutch Cylinder Repair Kit. | Sparex Part No.S.57736

0.02 kg

(1)

Very low stock (2 units)

129 SEK

The Sparex Rocker Cover Gasket - 6 Cyl. (Part No. S.41637) is a rectangular cork gasket with slightly rounded edges, ideal for sealing components on Perkins Engine Models.

New arrival

JMCE

*SPECIAL PRICE* - Rocker Cover Gasket - 6 Cyl. | Sparex Part No.S.41637

0.04 kg

(1)

Very low stock (2 units)

103 SEK

Three black Tedder haytines are displayed in various perspectives: one from the side, another from a diagonal angle, and the last from the front. Each haytine exemplifies the precise engineering synonymous with Sparex's design standards.

New arrival

JMCE

*SPECIAL PRICE* - Tedder haytine - RH - Length: 379mm, Width: 101mm, Ø9mm - Replacement for Lely To fit as: 4101701260 | Sparex Part No.S.78993

1.0 kg

(1)

Low stock (4 units)

79 SEK

Close-up of a Sparex Hammer Flail, an irregularly-shaped gray metal object with dimensions of 89mm top width, 155mm bottom width, and a 20.5mm diameter hollow cylindrical opening. It features jagged edges on one end and is often used as a replacement for Kuhn spare parts number 6060007 - S.79734.

New arrival

JMCE

*SPECIAL PRICE* - Hammer Flail, Top width: 89mm, Bottom width: 155mm, Hole Ø: 20.5mm, Radius 110mm - Replacement for Kuhn To fit as: 6060007 - S.79734

1.66 kg

(1)

Low stock (10 units)

124 SEK

New arrival

JMCE

*SPECIAL PRICE* - Switch Housing | Sparex Part No.S.52847

0.04 kg

(1)

Very low stock (2 units)

12 SEK

A black circular Thermostat Gasket with a textured surface, shown against a white background, designed for use in Sparex Engine applications. (Sparex Part No. S.57583)

New arrival

JMCE

*SPECIAL PRICE* - Thermostat Gasket | Sparex Part No.S.57583

0.01 kg

(1)

Low stock (5 units)

13 SEK

Observation Glass 134 x 110mm
- S.79196 - Massey Tractor Parts

New arrival

JMCE

*SPECIAL PRICE* - Observation Glass 134 x 110mm | Sparex Part No.S.79196

0.23 kg

(1)

Very low stock (1 unit)

121 SEK

Exploded view of a mechanical bearing assembly for a Massey Ferguson PTO Single Speed, displaying individual components including metal rings, seals, and a ball bearing from the Sparex Seal Kit (PTO - Single Speed), Part No. S.43931.

New arrival

JMCE

*SPECIAL PRICE* - Seal Kit (PTO - Single Speed) | Sparex Part No.S.43931

0.34 kg

(1)

Low stock (5 units)

367 SEK

New arrival

JMCE

*SPECIAL PRICE* - Bush | Sparex Part No.S.43536

0.05 kg

(1)

Very low stock (1 unit)

12 SEK

A versatile Sparex S Tine Clamp with helper 32x10mm, suitable for 50x12mm, featuring a three-sided design with a square opening, two prongs, and a circular hole for mounting—ideal for Universal Tractors (Part No. S.79397).

New arrival

JMCE

*SPECIAL PRICE* - S Tine Clamp with helper 32x10mm Suitable for 50x12mm | Sparex Part No.S.79397

0.32 kg

(1)

Low stock (5 units)

22 SEK

A Sealing Ring, Sparex Part No. S.41427, is a metal piston ring with an open gap used in engines, such as those found in Massey Ferguson tractors, to seal the combustion chamber.

New arrival

JMCE

*SPECIAL PRICE* - Sealing Ring | Sparex Part No.S.41427

0.05 kg

(1)

Very low stock (1 unit)

46 SEK

Close-up view of the dark-colored PTO Yoke - Quick Release (U/J Size: 23.8 x 61.2mm) by Sparex, featuring a cylindrical attachment at the bottom and sized at 1 3/8''-6 Spline (Sparex Part No. S.6038).

New arrival

JMCE

*SPECIAL PRICE* - PTO Yoke - Quick Release (U/J Size: 23.8 x 61.2mm) Size: 1 3/8''-6 Spline | Sparex Part No.S.6038

0.87 kg

(1)

Very low stock (2 units)

294 SEK

A round, red button labeled "STOP" within a white oval border, ideal as the Sparex Stop Control Knob (Part No. S.41558).

New arrival

JMCE

*SPECIAL PRICE* - Stop Control Knob | Sparex Part No.S.41558

0.01 kg

(1)

Low stock (8 units)

18 SEK

Three Tedder haytines of varying shapes and sizes, positioned next to each other against a white background, exemplify the precision craftsmanship for which Sparex is renowned.

New arrival

JMCE

*SPECIAL PRICE* - Tedder haytine - RH - Length: 460mm, Width: 137mm, Ø11mm - Replacement for Vicon To fit as: 99136241 | Sparex Part No.S.77909

0.67 kg

(1)

Low stock (4 units)

89 SEK

A metallic, machined part with a flat circular base and two holes near the top, resembling an Engine Oil Filter Head. This industrially designed component is often seen in Massey Ferguson machinery and is known as the Sparex Engine Oil Filter Head (Part No. S.40531).

New arrival

JMCE

*SPECIAL PRICE* - Engine Oil Filter Head | Sparex Part No.S.40531

0.26 kg

(1)

Very low stock (1 unit)

87 SEK

A Deluxe Seat Cover (Sparex Part No. S.71831) from Sparex, fitted onto a driver's seat inside a vehicle, showcases visible dashboard elements in the background and highlights its universal fit and waterproof protection.

New arrival

JMCE

*SPECIAL PRICE* - Deluxe Seat Cover - Tractor & Plant - Universal Fit | Sparex Part No.S.71831

0.58 kg

(1)

Very low stock (1 unit)

274 SEK

A close-up of a silver metal ball bearing with visible red lubricant inside, resembling the precision found in the Thrust Bearing Assembly 1 Replacement for Massey Ferguson by Sparex (Sparex Part No.S.4284).

New arrival

JMCE

*SPECIAL PRICE* - Thrust Bearing Assembly 1 Replacement for Massey Ferguson | Sparex Part No.S.4284

0.06 kg

(1)

Very low stock (1 unit)

56 SEK

Sparex Bucket Tooth, center tooth replacement part for JCB 3CX with two fasteners and worn surface, to fit as 53103205 (Sparex Part No. S.78328).

New arrival

JMCE

*SPECIAL PRICE* - Bucket Tooth, Centre Tooth, Replacement for: JCB. To fit as: 53103205 | Sparex Part No.S.78328

0.94 kg

(1)

Very low stock (1 unit)

87 SEK

This Sparex Thermostat Gasket (Part No. S.42211) features an irregular shape with multiple rounded protrusions and a small hole at one end, making it a perfect fit for Ford / New Holland models.

New arrival

JMCE

*SPECIAL PRICE* - Thermostat Gasket | Sparex Part No.S.42211

0.01 kg

(1)

Very low stock (1 unit)

27 SEK

A plain, black, circular metal disc featuring a small 41mm square hole in the center, identified as the Plain Harrow Disc 560x4.5mm by Sparex (Part No.S.77701), is commonly found on Universal Tractors.

New arrival

JMCE

*SPECIAL PRICE* - Plain Harrow disc 560x4.5mm - Hole 41mm Square Centre Hole | Sparex Part No.S.77701

8.62 kg

(1)

Low stock (6 units)

525 SEK

Close-up view of a black Sparex Poly V / Multi-Rib Belt - PK Section - Belt No. 8PK1700, with visible grooves on a white background.

New arrival

JMCE

*SPECIAL PRICE* - Poly V / Multi-Rib Belt - PK Section - Belt No. 8PK1700 | Sparex Part No.S.73443

0.26 kg

(1)

Very low stock (2 units)

165 SEK

A set of unassembled Piston Rings (Sparex Part No. S.40417), branded by Sparex, arranged in a circular pattern on a white background.

New arrival

JMCE

*SPECIAL PRICE* - Piston Ring | Sparex Part No.S.40417

0.14 kg

(1)

Low stock (4 units)

71 SEK

A pack of four Sparex Battery - MN1500/LR6/AA/AM3 (Part No. S.71207) alkaline batteries in a green, orange, and yellow blister packaging labeled "High Performance," featuring 1.5V power for reliable use.

New arrival

JMCE

*SPECIAL PRICE* - Battery - MN1500/LR6/AA/AM3 (Pk of 4 pcs.) | Sparex Part No.S.71207

0.1 kg

(1)

Very low stock (1 unit)

35 SEK

The Sparex Hydraulic Cylinder Stud (Part No. S.41621) is a double-ended threaded stud bolt, designed for Massey Ferguson machinery, measuring 9/16'' x 3'' UNF with threads on both ends and an unthreaded section in the middle.

New arrival

JMCE

*SPECIAL PRICE* - Hydraulic Cylinder Stud | Sparex Part No.S.41621

0.09 kg

(1)

Low stock (4 units)

46 SEK

The Universal Wing LH, designed to fit as 217001134 and available under Sparex Part No. S.77895, features a trapezoidal black metal blade with two holes of different shapes near one end and a sharp angle at the other end, making it compatible with Kverneland subsoilers.

New arrival

JMCE

*SPECIAL PRICE* - Universal Wing LH To fit as: 217001134 | Sparex Part No.S.77895

2.28 kg

(1)

Low stock (3 units)

171 SEK

A close-up of the Sparex Metric Hexagon Nut, M22x2.50mm (DIN 934) Metric Coarse, Sparex Part No. S.6812, zinc-plated with internal threading.

New arrival

JMCE

*SPECIAL PRICE* - Metric Hexagon Nut, M22x2.50mm (DIN 934) Metric Coarse | Sparex Part No.S.6812

0.07 kg

(1)

In stock (25 units)

6 SEK

A long, flat, rectangular metal plate measuring 37 inches by 8 inches with a thickness of 1 inch, featuring four holes along one edge and an additional hole near the opposite end—likely for mounting or fastening purposes. This plate is compatible with SUBSOILER models and can be identified by its Sparex part number S.78087 (PBA0208).

New arrival

JMCE

*SPECIAL PRICE* - Leg 37'' x 8'' x 1'' To fit as: PBA0208 | Sparex Part No.S.78087

36.42 kg

(1)

Very low stock (1 unit)

2 690 SEK

The Sparex PTO Yoke - Interfering Clamp Bolt (Sparex Part No. S.6114) features a U-shaped design with a bolt at the bottom, and is compatible with universal joints sized 30.2 x 92mm, having a bore diameter of 35mm and key size of 10mm.

New arrival

JMCE

*SPECIAL PRICE* - PTO Yoke - Interfering Clamp Bolt (U/J Size: 30.2 x 92mm) Bore Ø35mm, Key Size: 10mm. | Sparex Part No.S.6114

1.91 kg

(1)

Very low stock (1 unit)

660 SEK

A worn black rubber boot with a circular shape and a central hole, often found in Sparex gear lever assemblies for Nuffield tractors (Rubber Boot for Gear Lever | Sparex Part No.S.58716).

New arrival

JMCE

*SPECIAL PRICE* - Rubber Boot for Gear Lever | Sparex Part No.S.58716

0.08 kg

(1)

Very low stock (1 unit)

175 SEK

New arrival

JMCE

*SPECIAL PRICE* - Hydraulic Control Shaft | Sparex Part No.S.43530

0.35 kg

(1)

Very low stock (1 unit)

130 SEK

A cylindrical metal rod, specifically the Power Steering Rod with a Ø25mm shaft by Sparex (Part No. S.41874), featuring a threaded end and a small hole near the opposite end, likely a component for machinery or equipment similar to those used in Massey Ferguson Hydrosteer Cylinders.

New arrival

JMCE

*SPECIAL PRICE* - Power Steering Rod - Ø25mm shaft | Sparex Part No.S.41874

0.73 kg

(1)

Very low stock (1 unit)

166 SEK

The Sparex Part No.S.41350 Exhaust Manifold Gasket from Sparex features a black, irregularly shaped design with two circular holes and a rectangular hole in the center, making it perfect for ensuring a secure fit between the head and manifold of Perkins Engine models.

New arrival

JMCE

*SPECIAL PRICE* - Exhaust Manifold Gasket | Sparex Part No.S.41350

0.01 kg

(1)

Low stock (9 units)

12 SEK

A PTO Yoke - Quick Release (U/J Size: 22 x 54.8mm, Size: 1 3/8''-6 Spline), branded as Sparex Part No.S.6008, with a dark finish is viewed from the front against a white background.

New arrival

JMCE

*SPECIAL PRICE* - PTO Yoke - Quick Release (U/J Size: 22 x 54.8mm) Size: 1 3/8''-6 Spline | Sparex Part No.S.6008

0.68 kg

(1)

Very low stock (2 units)

189 SEK

A green dashboard warning light indicator with the symbol of a headlamp and three horizontal lines, typically indicating that the work lights or headlights are on, can be replaced by the "Rocker Switch Insert - Work Lights" from Sparex, Part No.S.57361.

New arrival

JMCE

*SPECIAL PRICE* - Rocker Switch Insert - Work Lights | Sparex Part No.S.57361

0.01 kg

(1)

Low stock (5 units)

8 SEK

New Arrivals

FiltersFilter & Sort

New Arrivals

Your cart

Managers Daily Special Promotions

Catalog Links

Legal Links

Account Quick Links

Choose options