Sparex Submersible Pump (12V) - S.14830
This powerful 12V submersible pump is perfect for a variety of marine applications. It's ideal for transferring fresh or saltwater, refuelling diesel (not petrol), bilge pumping, deck showers, and general wash-down tasks.
The pump features a robust, slimline design with a clip-on, easily cleaned filter. It's also equipped with a 13ft (4m) cable and comes with clips for easy connection to a 12V battery.
Features:
- Powerful 12V pump
- Flow rate: 18 LPM (4 gallons per minute)
- Pumping height: 9.7 meters
- Pressure: 0.96 bar (16 psi)
- Continuous duty (should not be run for long periods of time)
- Robust, slimline design
- Clip-on, easily cleaned filter
- 13ft (4m) cable with clips
- Suitable for fresh and saltwater
- Rapid diesel refuelling and transfer (not suitable for petrol)
- Bilge pump-out in tight areas
- Water transfer, deck showers, deck, anchor, and general wash-down
Specifications:
- Alternative to: 4793
- Amps: 4.5
- Body: POM
- Brand: Sparex
- Cable length (ft): 13
- Cable length (M): 4
- Current: 12V (4.5Amps)
- Duty: Continuous Duty - Should not be run for long periods of time.
- erp_hazardous: No
- Flow rate (LPM): 18
- Flow rate gallons per minute: 4
- Hose inner Ø (ins): 1/2
- Hose inner Ø (mm): 13
- Length (ins): 6 1/2
- Length (mm): 165
- Pressure (bar): 0.96 bar
- Pressure (psi): 16psi
- Pumping Height (M): 9.7
- Pump type: Centrifugal submersible and in-line pump
- Related products: 119239, 119241, 119243
- Supplied with: supplied with the cables/clips and hose.
- Tariff Code: 8413810090
- Temperature range: Diesel to +104°F (+40°C), Water to +176°F (+80°C)
- Volts: 12V
- Ø (ins): 1 1/2
- Ø (mm): 1 1/2
Instructions:
- Connect a hose to the outlet nozzle and immerse the complete pump in liquid.
- Connect the battery clips to the battery terminals (+) positive to (+) positive and (-) negative to (-) negative (if powering from a vehicle battery do not use with the engine running).
- For an in-line installation, unclip the filter to expose the inlet nozzle, connect a length of hose between the tank and nozzle. The pump must be fitted below the tank.
- Avoid dry running for long periods.
- For drinking water applications, sterilise regularly.
- Store away from excessive heat and direct sunlight to avoid external damage.
- If the pump fails to perform, check for blockages (including filters), leaks, and correct hose & electrical connections.
This product is not associated with any particular make or model.
This product is not associated with any particular OEM part number.