Sealey Dual Voltage 45A Plasma Cutter Inverter - PP45DV
The Sealey PP45DV is a dual-voltage plasma cutter inverter that runs from a suitable 110V or 230V supply. On 230V it offers 15–45A output with a manufacturer-rated maximum cut thickness of 25mm; on 110V it is limited to 15–20A and a maximum stated cutting thickness of 6mm. It features power factor correction, pilot arc, digital display and thermal overload protection, and requires a suitable compressed-air supply.
Key Features
- Dual 110V/230V input with voltage-dependent cutting capacity
- Up to 45A and 25mm cutting thickness on 230V only
- Up to 20A and 6mm cutting thickness on 110V
- Pilot arc, PFC technology and digital output display
- Includes 4m torch, 2m earth clamp, gas hose and power cable
Product Unique Selling Points
Dual 110V/230V input with voltage-dependent cutting capacity; Up to 45A and 25mm cutting thickness on 230V only; Up to 20A and 6mm cutting thickness on 110V. Genuine Sealey equipment for the stated use and manufacturer-listed limits.
Product Specifications
| Manufacturer |
Sealey |
| Supply voltage |
110V or 230V |
| Output at 110V |
15–20A |
| Output at 230V |
15–45A |
| Maximum cut thickness at 110V |
6mm |
| Maximum cut thickness at 230V |
25mm |
| Air requirement |
120L/min |
| Working air pressure |
58–116psi |
| Absorbed power |
5.5kW |
| IP rating |
IP21S |
| Power connection |
Bare wire |
| Manufacturer net weight |
12.2kg |
| Supplier shipping weight |
13.3kg |
Manufacturer Information
Sealey supplies professional hoists, winches, welding equipment and maintenance consumables. Model PP45DV details and compatibility are taken from its official manufacturer listing.
Suitable For
For trained personnel performing plasma cutting in suitably ventilated workshops equipped with the correct power supply, compressed air, protective equipment and fire safety provisions. The electrical supply is bare-wire and should be assessed by a competent installer. Maximum cutting capability depends on supply voltage.
Frequently Asked Questions
Does it run on both 110V and 230V?
Yes. The PP45DV accepts either supply when connected correctly.
Can it cut 25mm metal on 110V?
No. Sealey states a maximum 6mm on 110V, versus 25mm on 230V.
What is the maximum current?
20A on 110V or 45A on 230V.
Does it need compressed air?
Yes. The listed requirement is 120 litres per minute at 58–116psi.
What equipment is supplied?
A 4m torch, 2m earth clamp, 2m gas hose and 2m power cable.