Sealey Gasless Flux-Cored MIG Inverter Welder 140A - MIG140i
The Sealey MIG140i is a compact gasless flux-cored MIG inverter welder, with adjustable welding current from 20A to 140A. Its IGBT inverter design includes forced-air cooling, hot start, anti-stick and thermal cut-out. The set includes a fixed non-live MIG torch, 1.4m earth cable/clamp and a 0.45kg reel of 0.8mm flux-cored wire. It requires a suitable 230V bare-wire supply.
Key Features
- 20–140A IGBT inverter gasless flux-cored MIG welding
- Compact frame and carry strap for transport
- Hot start, anti-stick, forced-air cooling and thermal protection
- Includes fixed non-live torch, earth clamp and 0.45kg flux-cored wire
- Flux-cored wire only: 0.8mm or 0.9mm, up to 1kg reel
Product Unique Selling Points
20–140A IGBT inverter gasless flux-cored MIG welding; Compact frame and carry strap for transport; Hot start, anti-stick, forced-air cooling and thermal protection. A genuine Sealey product for its specified application.
Product Specifications
| Manufacturer |
Sealey |
| Manufacturer model |
MIG140i |
| Welding current |
20–140A |
| Duty cycle |
100% at 44A; 60% at 109A; 10% at 140A |
| Power consumption |
3.8kW absorbed |
| Supply |
230V bare-wire connection |
| Protection rating |
IP21S |
| Wire capacity |
1kg of 0.8/0.9mm flux-cored wire |
| Torch |
Fixed non-live MIG torch |
| Manufacturer nett weight |
5.26kg |
| Supplier shipping weight |
6.4kg |
Manufacturer Information
Sealey supplies automotive, motorcycle and workshop tools and equipment. Manufacturer specifications for model MIG140i are taken from its official product page.
Suitable For
For trained users performing flux-cored gasless MIG welding in appropriate ventilated workshops. This model is flux-cored only and requires suitably rated electrical connection and welding PPE; comply with the manufacturer manual and local electrical safety regulations.
Frequently Asked Questions
What welding current does MIG140i support?
The adjustable welding current is 20A to 140A.
Does it require shielding gas?
No. This is a gasless, flux-cored-wire-only MIG welder.
What wire sizes can be used?
Sealey specifies 0.8mm or 0.9mm flux-cored MIG wire, up to a 1kg reel.
What is included with the welder?
A fixed non-live MIG torch, a 1.4m earth cable/clamp and a 0.45kg reel of 0.8mm flux-cored wire.
Does it have a UK three-pin plug?
The manufacturer specifies a 230V bare-wire electrical connection; verify suitable installation.